Internet Model Shop  
Home |Up a Level |Terms & Conds |Search |View Basket |Checkout  |Contact Us |Login |

Left tabGeneral partsRight tab

EMAX 4 in 1 Quattro 30A X 4 UBEC Multi-rotor Brushless ESC Quadcopter EE01-30AEMAX 4 in 1 Quattro 30A X 4 UBEC Multi-rotor Brushless ESC Quadcopter EE01-30A
Continuous current: 30A*4
Weight: 130g
Dimension: 67.5*64.4*17mm
BEC output: 5V/3A
Burst current: 35A*4
Upgraded from Simonk firmware
- Low voltage protection, overheat protection and self-check functions
- Integrated 4 ESCs, and only one set of power supply input wire is needed
- Seperate power board, UBEC board, and control board

Price: 24.99


QQ Super ControllerQQ Super Controller
3 axis gyros, requirng minimal set up.

1.Multi-rotor flight control.
2. Built-in three-axis gyroscope and three-axis acceleration sensor.
3. support for self-stabilizing, super stable flight performance.
4.Support the general receiver, FUTABA S.BUS receiver, DSM2, DSMX 11MS, DSMX 22MS receiver, simplifying connection installation more convenient, ultra-bright LED.

Note: ideal for the beginer into quadcopter, you do not need to programme. Also self stabilising means the quad will not tip more than 60% from the level axis. Please note the self leveling can not be switched off - use the KK controller if this is an issue.

Processor: 32BIT ARM
Voltage: 3.6V-8.4V
Current: 60mA
Output rate:360Hz
Dimension (L-W-H): 43 * 29 * 13MM
Product weight: 15g / 0.5oz
Package size: 11 * 9 * 2cm / 4.3 * 3.6 * 0.8in
Package weight: 41g / 1.4oz

Price: 13.99


KK Pro Flight ControllerKK Pro Flight Controller
3 axis gyros, requirng minimal set up.

The KK pro flight controller is a built-in precise digital gyroscope and acceleration sensor, suitable for maneuvering flight. Besides all standard PCM and 2.4G digital receiver, It also compatiblr with S.BUS DSM2 and DSMX satellite. It has the most convenient way to bind the model and adjust the senser that allows you more time to enjoy the flight.

This controller is great for beginners to medium experience who do not want to programme controllers.

Switch transfer, no need complex programe
Suitable for maneuvering flight
Support normal receiver,S.BUS receiver, DSM2, DSMX receiver
Simple installation and wiring

Processor: 8BIT CISC
Output rate: 330Hz
Voltage 3.6V-8.4V
Dimension(L-W-H): 43X29X13MM
Current: 30mA
Weight: 12g

Price: 13.99


Mounting PlateMounting Plate
Mounting Plate Mount Adapter for Multicopter Flight Controller

1.6mm thickness
3 gram weight

Can be used for 45 degree conversion for FC installation.

Price: 3.99


Male-to-Male servo lead 15cmMale-to-Male servo lead 15cm
15cm Male To Male Servo Extension Lead Wire

Ideal for multi-copters.

Price: 0.89


Male-to-Male servo lead 15cm - 5pcsMale-to-Male servo lead 15cm - 5pcs
15cm Male To Male Servo Extension Lead Wire


Price: 3.09


Servo Extension LeadServo Extension Lead
Servo Extension Lead (price for 1 lead)
300mm (30cm) RC Servo Extension Lead Wire.
Price: 0.89


X Motor Mount 16.5mm centre motorX Motor Mount 16.5mm centre motor
For Brushless Outrunner Motors.
CNC Machined Aluminum X Motor Mount

Bolt pattern 16*16mm
Center Holes 16.5mm centre to centre
Outer holes 33cm centre to centre

Price: 2.99


XXD A2212 1000KV Brushless motor with mountingXXD A2212 1000KV Brushless motor with mounting
Suitable for Aeroplanes and Quadcopters

KV 1000
Max Efficiency 80%
Max Efficiency Current 4-10A (>75%)
Current Capacilty 12A/60s
No Load Current @10v 0.5A
Motor Dimensions: 27.5 * 30mm
Shaft Diameter 3.17mm
Weight 47g

Price: 9.99


Power ESC BoardPower ESC Board
Power/ESC Board Max 8 pcs ESC with one Battery

1 KK Power Board
1 Deans Plug
Battery wire approx 10cm (Blk/Red) with Heat Shrink

(Distribution Board V1)

Price: 4.19


Copyright - Internet Model Shop 2010

The Internet Model Shop (UK) Ltd., C/S 261 Green Lanes, Green Lanes, Palmers Green, London N13 4XE. Tel: +44 (0) 7584893047
Site Map |  Contact Us |

Buy now with PayPal